The Ultraflex Tubular Delineator has been designed for use on Work sites that require Medium to Long term Delineation.

The Ultraflex gives the user the perfect combination of durability, visibility and simple installation making it a very cost effective solution for many different situations

The Bright Fluorescent colour and high quality reflective give greater visibility under the most demanding conditions. The robust Urethane material and clever design features mean that the Ultraflex can withstand impacts in excess of 100 kph and still return to an upright position.

A low profile base and increased flexibility that will reduce the shear stresses created when run over. This means once correctly installed you will have less incidence of the Delineator detaching from the road surface.

Installation is made easy with the use of the Sreka Butyl Pad or alternatively you can either bolt or glue with a bitufix type adhesive.

The post Ultraflex Tubular Delineator appeared first on SREKA.

As it becomes more important to keep traffic flowing through our busy Urban Streets the Ultrakerb combination of a bright colour and minimal footprint provide a continuous line of delineation that gives the driver a very clear message of their pathway through your work zone. The Ultrakerb takes up a lot less space than large plastic barriers but still provides a very clear visual demarcation line. Each section is 750mm x 250mm x 50mm and can be bolted or glued to the road surface.

Ultrakerb can also be used for Cycle lanes, Carparks or to provide a safe pedestrian space between your shopfront and traffic areas.

The post Ultrakerb Enhanced Delineation appeared first on SREKA.

Easy to apply just remove the cover paper from one side then apply to road surface. Press firmly down then remove the otherside and place product on top of pad. In cold conditions it is recomended that the road surface should be heated first.

Available in 210mm x 210mm (pack size 50) or 100mm x 100mm (pack size 200).

The post Adhesive Butyl Pads appeared first on SREKA.

Material

• DD1, DD2, DD4 bases are manufactured from high shear polyurethane with HDPE support posts used for all bases. Standard post length is 600mm but can be customised to suit your requirements.

Types

• Mastaflex DD1 robust surface mount 600mm post.
• Mastaflex DD2 ground socket 600mm post.
• Mastaflex DD4 surface mount 600mm post.

The post Mastaflex Sign Support system appeared first on SREKA.

Used on intersection round-a-bouts, Traffic Islands or in Car Parks this versitile Sign Support can also be used to indicate hazards or delineate lanes

The base is manufactured from a high impact Thermo-plastic with a High Density polyethelyne post.

The standard post is 840mm but custom sizes can be cut to suit your requirements.

If required a yellow or orange post is also available.

Can be installed using either Bolts or Adhesive

The post Reflex Sign Support System appeared first on SREKA.

Dimensions

• Height 40mm
• Width 25mm

Material

• Manufactured from a thermoplastic polymer which has excellent durability allowing multiple run overs. Fixing to the road surface is accomplished with a synthetic rubber adhesive tape which is affixed to the base of the marker.

Types

• TRM1 White – carton quantity 1000
• TRM1 Yellow – carton quantity 1000

The post Temporary Reseal Markers appeared first on SREKA.

Road Edge Markers

Dimensions

• Length 1.4 metres (special lengths on request).
• Thickness 3-4mm.
• An 80mm barb pushes out for increased stability.

Material

• High impact grade UV stabilized PVC manufactured to provide a high gloss finish which allows easy maintenance and high visibility. Transit approved labels.

Types

• MK18 Heavy weight post for easy driving.
• MK19 Medium weight post.
• MK11 Light weight post with excellent flexibility.
• All posts are available without labels.
• Installation rammer available.

Culvert Markers

Designed to assist in the location of culverts and drains.

Dimensions

• Length 1.3 metres (special lengths on request).
• Thickness 3mm.
• An 80mm barb pushes out for increased stability.

Material

• High impact grade UV stabilized PVC manufactured to provide a high closs finish which allows easy maintenance and high visibility.

Types

• Available in green, blue, yellow and orange ex stock.
• Other colours available on request – minimum order quantities apply.
• Vinyl identifying numbers available on request.

The post Marker Posts appeared first on SREKA.

Dimensions

• Height 275mm
• Base 230mm x 150mm
• Upright max width 120mm

Material

• Manufactured from a high impact resistant urethane which allows multiple run overs. The lane divider can be either bolted or glued in place.

Types

• Available in standard white and yellow. Other colours on request.

The post Lane Divider appeared first on SREKA.

Material

• The base is manufactured from a tough hard wearing polymer.
• The post is High Impact UVPVC with a high gloss finish which allows easy maintenance and high visibility.

Installation

• The base can be glued or bolted.
• The post fits into a slot in the base and is retained with a small grub screw to allow easy routine maintenance.

The post Sentry Base and Post appeared first on SREKA.

Dimensions

• Width 95mm x 95mm
• Height 20mm

Material

• The markers body is mounted from Acrylonitrile Butadiene Styrene (ABS). This provides a tough durable casing which will not compact, collapse or delaminate (a common fault in epoxy filled markers when used in heavy traffic areas).

Types

The post Reflective Raised Pavement Marker appeared first on SREKA.